 |
|
|
|
|
|
|
|
|
|
|||||||
| Home | | | About Us | | | Products | | | Waterjetting Applications | | | Services | | | Our Clients | | | Case History | | | Contact Us |
|
||||||||||||||
|
||||||||||||||
|
||||||||||||||
|
||||||||||||||
|
||||||||||||||
|
||||||||||||||
HIGH PRESSURE NOZZLES |
| Material | Pmax [bar] | L [mm] | Code | Diameters XXX [mm] - in stock |
| Stainless Steel | 600 | 22 | 01.01.XXX | 1.05; 1.30; 1.40; 1.50; 1.70; 1.80; 1.90; 2.10; 2.20; 2.30 |
| Stainless Steel/tung. | < 1000 | 28,5 | 01.02.XXX | 0.78; 0.91; 1.09;1.27; 1.39; 1.57; 1.75; 1.95 |
02) NOZZLES: FLAT JET
Standard type nozzles for lances with inbodyrated pistol. High quality flat jet.
- Hex: SW14
- d = equivalent diameter
- Other diameters (d = XXX) on request
- Thread 1/4"NPT
| Material | Pmax [bar] | Angolo | Code | Diameters XXX [mm] - in stock |
| Stainless Steel | 600 | 30° | 02.01.XXX | 1.05; 1.30; 1.40; 1.50; 1.70; 1.80; 1.90; 2.10; 2.20; 2.30 |
| Stainless Steel/tung. | < 1000 | 15° | 02.02.XXX | 0.78; 0.91; 1.09;1.27; 1.39; 1.57; 1.75; 1.95 |
THREADED INSERTS
03) THREADED INSERTS - ROUND JET
Inserti in industrial sapphire or martenistic stainless steel 1.4034 tempered to 56HRC to increase the hardness and resistance to wear.
- Diameters (d = XXX) on request.
- (*) Only if fitted correctly and fixed with Loctite 601.
- (**) Code 03.06 brass seat and cross flow guide for maximum performance
- Legend: G = thread, L = total length of the insert.
| Material | Pmax [bar] | G | L [mm] | d=XXX [mm] | Code |
| sapphire/ stainless steel | 1500 (*) | M3 | 3 | 0.10 ÷ 1.00 | 03.01.XXX |
| stainless steel | 1500 (*) | M3 | 3 | 0.30 ÷ 1.30 | 03.11.XXX |
| sapphire/ stainless steel | 1500 (*) | M4 | 4 | 0.50 ÷ 1.70 | 03.02.XXX |
| stainless steel | 1500 (*) | M4 | 4 | 0.40 ÷ 1.80 | 03.12.XXX |
| stainless steel | 1500 (*) | M5 | 5 | 0.50 ÷ 2.60 | 03.13.XXX |
| sapphire/ stainless steel | 1500 (*) | M6 | 6 | 0.70 ÷ 3.00 | 03.03.XXX |
| sapphire/ stainless steel | 1500 (*) | M8X1.25 | 8 | 0.70 ÷ 4.00 | 03.04.XXX |
| sapphire/ stainless steel | 2500 | M8X1 | 12 | 0.15 ÷ 1.50 | 03.05.XXX |
| stainless steel | 2500 | M8X1 | 12 | Tappo | 03.05.000 |
| stainless steel | 2500 | M10X1.5 | 19 | 0.20 ÷ 1.20 | 03.06.XXX (**) |
| stainless steel | 2500 | M10X1.5 | 19 | Tappo | 03.06.000 |
| stainless steel | 2500 | M12X1.5 | 19 | 0.20 ÷ 1.20 | 03.07.XXX |
| stainless steel | 2500 | M12X1.5 | 19 | Tappo | 03.07.000 |
INSERT NOZZLES
04) INSERT NOZZLES IN SAPPHIRE
Round jet nozzles for lance and pistol,in hardened steel with sapphire plate.
- Pmax: 2500 bar
- Diameters (d = XXX) on request
- O-Ring (8x2): Code 04.00.900
- Ring (12x8x1): Code 04.00.901
- Legend: L = total insert length.
| Material | Pmax [bar] | L [mm] | Code | Diameters XXX [mm] |
| Zaffiro/Stainless Steel | 2500 | 24 | 04.01.XXX | 0.10 ÷ 1.00 |
| Zaffiro/Stainless Steel | 2500 | 24 | 04.02.XXX | --- |
05) INSERT NOZZLES - ROUND JET
Insert nozzles for lance and pistol, in stainless steel 1.4034 hardened HRC 56 (DIN 50049/2 e 50049/3.1b). Available Also available with centering device (FIX) through the use of two paralel reference plains.
- Pmax: 1500 bar
- Diameters (d = XXX) on request
- O-Ring (8x2): Code 04.00.900
- Ring (12x8x1): Code 04.00.901
- Legend: L = total insert length.
| Material | Pmax [bar] | L [mm] | Code | Diameters XXX [mm] |
| Stainless Steel | 1500 | 12 | 05.01.XXX | 0.50 ÷ 0.90 |
| Stainless Steel | 1500 | 24 | 05.02.XXX | 0.70 ÷ 4.00 |
06) INSERT NOZZLES - FLAT JET
Insert nozzles for lance and pistol, in stainless steel 1.4034 hardened HRC 56 (DIN 50049/2 e 50049/3.1b). Available Also available with centering device (FIX) through the use of two paralel reference plains.
- Pmax: 1500 bar
- Diameters (d = XXX) on request
- O-Ring (8x2): Code 04.00.900
- Ring (12x8x1): Code 04.00.901
- Legend: L = total insert length.
| Type | Material | Pmax [bar] | L [mm] | Angle | Code | Diameters XXX [mm] - in stock |
| Without FIX | Stainless Steel | 1500 | 20 | 15° | 06.01.XXX | 0.90; 1.00; 1.10; 1.20; 1.30; 1.50 |
| With FIX | Stainless Steel | 1500 | 20 | 30° | 06.02.XXX | --- |
| 45° | 06.03.XXX | |||||
| 15° | 06.04.XXX |
 |
|
| Download Partial Catalog | Download Complate Catalog |
